Characteristics

AIR FLOW AND PERFORMANCE

• Fully adjustable air flow (212 cfm at 0.1 in. w.g.)
• Sensible recovery efficiency (SRE) of 68% at 0 °C (32 °F) 30 L/s
• Sensible recovery efficiency (SRE) of 58% at ‑25 °C (‑13 °F) 26 L/s
• Recirculation defrost

VOLTAGE

• 120V, 60 Hz, 1.1A, 124W

BENEFIT

• Reduces heating demand in winter and cooling demand in summer
• Ultra‑quiet: factory calibrated and balanced
• Easy installation and maintenance
• Designed and manufactured in Canada to operate in variable climatic conditions

CONSTRUCTION

• Door and housing in corrosion‑resistant galvanized steel, 24-gauge, pre-painted neutral white
• Convenient, screwless hinged door
• Ultra‑thin: 12 in. (305 mm)
• No drain required
• Lightweight for ease of installation: 43 lb (19.5 kg)
• Duct connections size: 6 in. (152 mm)
• Merv8 charcoal polyester filters
• Side Port model only
• Reverse air flow configuration available as a factory installed option (‑R)
• For further explanation, please refer to the document Normal and Reverse
• Stale air exhaust requires a backdraft damper (not included)

MOTOR

• Two high‑efficiency sealed motors with closed housing and automatic thermal protection
• Balancing without flow keys. 100% electronic adjustment
• Integrated pressure ports on the door for quick and accurate balancing

ENERGY RECOVERY CORE

• High‑efficiency, highly durable 100% polymer core
• Recovers both latent and sensible energy. (Heat and Humidity)
• Meets or exceeds ASHRAE 90.1‑2010 requirements
• Washable with soapy water to restore full performance without degradation or contamination
• Antimicrobial protection – ISO846
• No virus transfer – tested per ASTM F1671
• Zero cross‑contamination – certified per AHRI 1060
• Flammability tested – UL 94 HB

CONTROL

• 2 control choices available:
  • Optional Decora‑style wall‑mounted control/timer (SA‑LT15). INTERMITTENT (20‑40) – CONTINUOUS – OFF – Timer (20‑40‑60 minutes)
  • Optional digital Decora‑style wall‑mounted control/timer (SA‑LCD15). INTERMITTENT (20‑40) – CONTINUOUS – Humidity – Recirculation – OFF

INSTALLATION

• Can be ceiling‑mounted or suspended
• Easily installed in the ceiling void or just below the fire‑rated ceiling
• Set of nylon suspension straps included for installation
• Furnace interconnect plug connector, included

SETTING (AIR FLOW)

• Balance the unit using the supplied instructions
• All the installer needs are the required flow rates, a manometer, and 5 minutes to adjust and balance the system
• Simply specify the air flow rates for Low Speed and High Speed
• The static pressure of the system should ideally be less than or equal to the static pressure indicated by the graph for High Speed
• You don’t have to worry about static pressure to limit air flow or adding flow keys as other devices. All you must do is provide ducting that doesn’t limit maximum flow, and the unit’s adjustments will allow you to fine‑tune flow rates

WARRANTY

• Motor five‑year. Other parts except filters and pre‑filters one‑year

APPLICATION

• Ideal for multi‑residential buildings and small to mid‑size homes
• Improves indoor air quality by exhausting pollutants, dust, and allergens outdoors, while supplying an equivalent amount of fresh air in the home

IMPORTANT NOTE

• No controls are included with the purchase of an ERV or HRV. SA‑LT15 and SA‑LCD15 controls must be purchased separately

Related Products

• 

  SSALE115

  ERV ‑ Energy Recovery Ventilator

• 

  SSALE150

  ERV – Energy Recovery Ventilator

• 

  SSAME115R

  ERV – Energy Recovery Ventilator With Recirculation

• 

  SSKHE130R

  ERV – Energy Recovery Ventilator With Recirculation

• 

  SSKHH150R

  HRV – Heat Recovery Ventilator With Recirculation

Complementary Products

• 

  SA-LCD15

  Ventilation System Digital Wall Control

• 

  SA-LT15

  Ventilation System Basic Wall Control